Intel DH55PJ BOXDH55PJ Manual De Usuario

 21

 

The parallel port is implemented as a 26-pin header on the board.  Use the BIOS Setup 
program to set the parallel port mode.   

 

The location of the parallel port header 

The board supports Intel High Definition Audio via the Realtek ALC888S audio codec. 

The ALC888S-based audio subsystem supports the following features: 
•  Advanced jack sense for the back panel audio jacks that enables the audio codec to 

recognize the device that is connected to an audio port.  The back panel audio 
jacks are capable of retasking according to the user’s definition, or can be 
automatically switched depending on the recognized device type.  

•  Stereo input and output via back panel jacks 
•  Headphone and Mic in functions for front panel audio jacks 
•  A signal-to-noise (S/N) ratio of 90 dB 

Audio software and drivers are available from Intel’s World Wide Web site. 

 

 

Obtaining audio software and drivers 

Section 1.3, page 14 

The board contains audio connectors and headers on both the back panel and the 
component side of the board.  The component-side audio headers include the 
following: 
•  Front panel audio (a 2 x 5-pin header that provides headphone and mic in signals 

for front panel audio connectors) (yellow) 

•  S/PDIF audio header (1 x 4-pin header) (yellow) 
•  Internal mono speaker header (1 x 2 pin header) (yellow) 

 

The locations of the front panel audio header, S/PDIF header, and 
internal mono speaker header 

The signal names of the front panel audio header  

The signal names of the S/PDIF header 

The signal names of the internal mono speaker header 

The back panel audio connectors 

Section 2.2.1, page 38