Intel DH55PJ BOXDH55PJ Manual De Usuario
Los códigos de productos
BOXDH55PJ
Technical Reference
49
2.3
Jumper Block
CAUTION
Do not move the jumper with the power on. Always turn off the power and unplug the
power cord from the computer before changing a jumper setting. Otherwise, the
board could be damaged.
power cord from the computer before changing a jumper setting. Otherwise, the
board could be damaged.
Figure 13 shows the location of the jumper block. The 3-pin jumper block determines
the BIOS Setup program’s mode. Table 26 describes the jumper settings for the three
modes: normal, configure, and recovery.
the BIOS Setup program’s mode. Table 26 describes the jumper settings for the three
modes: normal, configure, and recovery.
Figure 13. Location of the Jumper Block