Kompernass KH 967 Manual De Usuario

6

If you have inserted the batteries the right way up, 
as described at paragraph a) ...
 move the switch to the center, to the position with 

the "Charge" 

symbol, and ...

•

connect the 

power plug to the power socket.

 If all batteries have been placed correctly, the charge

indicator LED lights up at each charging slot.

Danger! If a charge indicator LED is not lit, even though
the battery has been correctly inserted, then the battery is
faulty. 

a faulty battery. A faulty battery can overheat and then
explode.

•

Only charge with the cover closed. This will provide
sufficient protection against flying battery parts in the
event of an explosion due to overheating.

Ni-Cd batteries that are not fully discharged should be
discharged first, to avoid the possibility of "memory
effects".
 If you have inserted up to 4 Ni-Cd batteries, 

move the 

switch to the far right, to the position 

with the "Discharge" 

symbol.

 Allow the Ni-Cd batteries to discharge until the 

test indicator light is barely lit, meanwhile testing 
the batteries a few times. For this, push the switch all
the way to the left, into the position with the symbol 

„Test“.

Important: Do not allow Ni-Cd batteries to become 
completely discharged, as this may ruin them. Therefore,
do not allow the batteries to discharge until the test 
indicator light goes off completely. The discharge function
in the four charging shafts is available for 1.2 V batteries
only – 

KH967_IB_AkkuChar_neu_UK.qxd  21.04.2006  10:38 Uhr  Seite 6