Outback Power Systems GFX1548 Manual De Usuario

900-0113-01-00 Rev A 

11

 

      

The GFX Series inverters are intended for on-grid, off-grid, and grid-interactive applications.  These 
models are designed to use a battery bank to store energy.  They can work in conjunction with 
photovoltaic (PV) panels to harvest solar energy, as well as wind turbines and other renewable 
sources.  These sources charge the battery, which in turn is used by the inverter. 

In on-grid applications, grid power is used to run the loads.  When excess PV (or another renewable 
energy source) is available from the batteries, the inverter supports those loads with the PV.  When the 
PV exceeds the load requirements, the inverter sells that excess power back through its input, to the 
utility grid.  When the utility grid is not available, the inverter takes over to run the loads with PV and 
energy stored in the battery bank.   

If the inverter is used as the primary source, the grid power will be used when the batteries have been 
drained.  In this situation, the AC power, PV harvest, or other renewable energy can be used to 
recharge the battery bank. 

In off-grid applications, the inverter can use the harvested energy from the battery bank as the 
primary power source.  An AC generator can also be connected to support the system when required.