AEG PV 2000 Manual De Usuario

risk of electric shock

1.  Do not remove the casing. Protect PV

®

 contains no user serviceable 

parts. Refer servicing to qualified service personnel.

Both AC and DC voltage sources are terminated inside the PV-Inverter.

Please disconnect these circuits before servicing.

2.  When a photovoltaic panel is exposed to light, it generates a DC 

voltage. When connected to this equipment, a photovoltaic panel will 
charge the DC link capacitors.

3.  Energy stored in this equipment’s DC link capacitors presents a risk 

of electric shock. Even after the unit is disconnected from the grid 
and photovoltaic panels, high voltages may still exist inside the PV-
Inverter. Do not remove the casing until at least 30 minutes after dis-
connecting all power sources.

4.  This unit is designed to feed power to the public power grid (utility) 

only. Do not connect this unit to an AC source or generator. Connec-
ting Protect PV

®

 to external devices could result in serious damage to 

your equipment.

5.  Remove the unit carefully from its packaging and inspect for external 

damage. If you find any imperfections, please contact your local AEG 
PS dealer.

6. Hot surfaces
     Although designed to meet all safety requirements, some parts and 

surfaces of Protect PV are still hot during operation. To reduce the risk 
of injury, do not touch the heat sink at the back of the PV-Inverter or 
nearby surfaces while Protect PV is operating.