Chicago Electric 96299 Manual De Usuario
SKU 96299
For technical questions, please call 1-800-444-3353.
PAGE 3
Electrical Safety
Avoid body contact with grounded surfaces such as pipes, radiators, ranges,
1.
and refrigerators. There is an increased risk of electric shock if your body is
grounded.
grounded.
Do not expose power tools to rain or wet conditions.
2.
Water entering a power
tool will increase the risk of electric shock.
Do not abuse the Charger’s power cord. Never use the Power Cord to carry
3.
the Charger or pull the Plug from an outlet. Keep the Power Cord away from
heat, oil, sharp edges, or moving parts. Replace damaged Power Cords im-
mediately. Damaged Power Cords increase the risk of electric shock.
heat, oil, sharp edges, or moving parts. Replace damaged Power Cords im-
mediately. Damaged Power Cords increase the risk of electric shock.
Personal Safety
Stay alert. Watch what you are doing, and use common sense when operat-
1.
ing a power tool. Do not use a power tool while tired or under the influence
of drugs, alcohol, or medication. A moment of inattention while operating power
tools may result in serious personal injury.
of drugs, alcohol, or medication. A moment of inattention while operating power
tools may result in serious personal injury.
Dress properly. Do not wear loose clothing or jewelry. Contain long hair.
2.
Keep your hair, clothing, and gloves away from moving parts. Loose clothes,
jewelry, or long hair can be caught in moving parts.
jewelry, or long hair can be caught in moving parts.
Avoid accidental starting. Be sure the Rotation Button (6) is in the locked
3.
position before inserting the Battery. Carrying power tools with your finger on
the trigger, or inserting the Battery with the trigger depressed, invites accidents.
the trigger, or inserting the Battery with the trigger depressed, invites accidents.
Do not overreach. Keep proper footing and balance at all times.
4.
Proper footing
and balance enables better control of the power tool in unexpected situations.
Use safety equipment. Always wear eye protection.
5.
Dust mask, nonskid safety
shoes, hard hat, or hearing protection must be used for appropriate conditions.
Always wear ANSI-approved safety goggles when working with this tool.
Always wear ANSI-approved safety goggles when working with this tool.
Tool Use and Care
Use clamps (not included) or other practical ways to secure and support the
1.
workpiece to a stable platform. Holding the work by hand or against your body
is unstable and may lead to loss of control.
is unstable and may lead to loss of control.
Do not force the tool. Use the correct tool for your application.
2.
The correct
tool will do the job better and safer at the rate for which it is designed.
Do not use the power tool if the trigger does not operate it.
3.
Any tool that cannot
be controlled with the trigger is dangerous and must be replaced.