Yamaha 3-axis model Manual De Usuario
11-8
Chapter 11 FXYBX/SXYBX
Select the under head length of the bolt for fixing the tool so that the screw length
from the slider installation surface is 6mm or less.
from the slider installation surface is 6mm or less.
!
CAUTION
If the screw length from the installation surface is 8mm or more, the screw
could interfere with the stroke cover.
could interfere with the stroke cover.
NOTE
There is a step on the top of the slider. The actual tool installation surface is the
shaded section shown above.
shaded section shown above.
3-2
SXYBX arm type 2-axis model
Eight M6 coarse thread tap holes and two
φ6 reamer holes are opened on the
Y-axis slider.(Refer to Fig. 11-10.) Install the user tool onto the Y-axis slider
using these holes.
Four M5 coarse thread tap holes are also opened on the slider side. Use these as
required.
using these holes.
Four M5 coarse thread tap holes are also opened on the slider side. Use these as
required.
Fig. 11-10 SXYBX arm type
(T
oler
ance betw
een knoc
k (0.02)
8-M6
×1.0 Depth16
32
70
134
2-
φ6H7 Depth10
90
20
50
12.5
4-M5
×0.8 penetration
(same on opposite surface)
12
122
12