Cisco Systems 2130 Manual De Usuario

The Cisco ADE 2130 and 2140 Series appliance (see 

) is contained in a standard shelf-rack 

enclosure. The appliance weighs from 30 lb (13.6 kg) to 51.5 lb (23.4 kg) depending on what options are 
installed in the appliance. It measures 3.5 inches high x 16.93 inches wide x 20 inches deep (8.9 cm x 
43.2 cm x 50.8 cm). These dimensions do not include the rack handles.

This guide describes the Cisco ADE 2130 and 2140 Series appliance models listed in 

.

See 

upgrade options and spare part numbers.

The Cisco ADE 2130 and 2140 Series appliance is configured for AC-input or DC-input power, mounted 
in a standard 19-inch (48.3 cm) 2- or 4-post equipment rack (using the rack-mount brackets provided), 
and includes the following features: 

Microprocessor: 

Cisco ADE 2130 Series appliance—Intel Xeon 1.86-GHz processor with a 1066-MHz front side 
bus (FSB) and 8 MB of Layer 2 cache (for the Cisco ADE 2130 Series appliance specifications, 
see 

Cisco ADE 2140 Series appliance—Dual Intel Xeon 1.86-GHz processor with a 1066-MHz 
front side bus (FSB) and 8 MB of Layer 2 cache (for the Cisco ADE 2140 Series appliance 
specifications, see 

)

Eight synchronous dynamic RAM (SDRAM) slots support up to 8 GB (2 GB factory installed)

Support for up to 6 x 147-GB SAS hard drives (1 x 147-GB SAS hard drive factory installed)

Integrated RAID at levels 0, 1, 5, 1+0, and 5+0

Two fixed RJ-45 10BASE-T/100BASE-TX/1000BASE-T network interface connectors (located on 
the rear panel)

Two optional RJ-45 10BASE-T/100BASE-TX/1000BASE-T network interface connectors using a 
mezzanine module (located on the rear panel)

t?

r

t?

r

q

v

b n l o ` b s

h uhc

o c?

m ?b`a PQR OP

r

Y

O

OO

202499

Cisco Application Deployment Engine Series 2130

CADE-2130-K9

Cisco Application Deployment Engine Series 2140

CADE-2140-K9