Cisco Systems 2130 Manual De Usuario

You need the following tools and equipment to install, replace, and remove the hardware options:

Number 1 and 2 Phillips screwdrivers

ESD or antistatic wrist strap and conductive foam pad or mat (recommended)

To begin the installation, you must remove the front bezel and appliance top cover. Before removing the 
cover, power down the appliance, and unplug all external cables and the AC power cable or DC power 
wires.

Before performing any of the following procedures, ensure that power is removed from the DC circuit. 
Statement 1003

Before working on a chassis or working near power supplies, unplug the power cord on AC units. 
Statement 246

A nonskid surface or a stop behind the appliance may be needed to prevent the appliance from sliding 
on your work surface.

To remove the cover: 

Review the information in the 

 and the 

.

Cisco ADE Accelerator Card – 10 Gb/s (requires 
10-Gb small form factor pluggable module [XFP] and 
memory)

CADE-EXP-NXN2FG=

Cisco ADE XFP – long reach

CADE-XO-NX10GSLR1=

Cisco ADE XFP – short reach

CADE-XO-NX10GMLR1=

Cisco ADE – 2-GB onboard memory for 10-GigE card CADE-XO-NRDR22GB1=

1.

Serial ATA = Serial Advanced Technology Attachment. 

2.

SAS = Serial Attached SCSI (Small Computer System Interface).