Chicago Electric 67854 Manual De Usuario

Page 7

Item 67854 

        

Adjust the Headband so that the helmet 

is seated securely on your head as low 

as possible and close to your face.
Adjust the Headband width by turning the 

Ratcheting Headband Knob to make sure the

Front Cover Lens is aligned with your eyes.
Adjust the Headband height by tightening or loosening 

the top strap until the Helmet fits snug on your head.  

Once the Headband is properly adjusted, lower the 

Helmet over your face until the proper angle is found. 

Then turn the Tension Adjustment Knobs on either side 

of the helmet, locking the helmet’s angle in place.

Block 

Nut 

 (9)

Headband 

strap  

adjuster

Top  

Strap 

At the moment the welding operation is started, the 

filter screen automatically changes from clear to dark.
The operator can vary the amount of time it takes 

the filter to return to a clear state and the sensitivity 

of the sensor using the controls inside the helmet.
The Sensitivity setting changes the amount 

of light needed to make the filter react.

Adjusts the speed the lens changes.

In FAST position: .25 - .45 seconds

In SLOW position: .65 - .80 seconds

LOW 

HIGH

SLOW 

 FAST

ANSI Z87.1-2003           Variable Shade 4/9-13 SKU 67854

Adjusts the amount of light needed 

to activate the lens to darken

This Welding Helmet utilizes high performance solar 

cells as power supply, and has two built-in 3V lithium

batteries as power backup. No change of battery is 

needed. Under normal welding conditions, users can

expect a battery lifetime of more than 6 years.

User-selectable variable shades from 9 to 13 are

adjusted at the turn of a shade knob (shade variable). 

This product is in full conformity with related DIN, ISO, 

EN379 safety standards and ANSI Z87.1-2003 standard.

The ultra high performance of UV and IR Auto-

Darkening filters provides to user’s eyes and face 

full protection against UV and IR radiation during

entire welding process, even in clear state. The UV/

IR protection level is up to shade 16 at all times.

A Cheater Lens (sold separately) can be attached to 

the inside of the helmet by unhooking the wire bar at 

the bottom of the Inside Lens Cover, sliding the Cheater 

Lens in place, then securing it with the wire bar.