Fujitsu DL7400 Manual De Usuario

 

3.  Press the ONLINE button to return online. You are ready to 

print using the selected menu. 

 

Before you start to print, make sure that paper is loaded. 

To start printing, press the ONLINE button to place the printer online. 
Then start your software. 

To stop printing immediately, press the ONLINE button to place the 
printer offline. You can also use your software to stop printing, but there 
will be a slight delay before printing stops. Any data sent to the print 
buffer but not yet printed is stored until you resume printing. Data in the 
print buffer is lost if you turn the printer off. 

To resume printing, press the ONLINE button again. To cancel printing, 
use the cancel commands provided by your software or computer. To 
clear the print buffer, place the printer offline and press the PRINT 
MODE and AUTO GAP buttons. Any data sent to the print buffer before 
you canceled printing will be lost. 

The printer can “sense” when paper runs out. Depending upon how PPR-
OUT (paper-out) is set in setup mode, the printer either: 

•  Stops printing and lights the red PAPER OUT indicator, or 
•  Continues printing until no more data remains in the printer. 

See Chapter 5 for details on setting PPR-OUT. The factory default is to 
stop printing if continuous forms paper runs out and to continue printing 
if single sheet paper runs out. 

To resume printing when paper runs out, use either of the methods 
described below: 

This method is convenient to continue printing under the paper-out 
condition, but is not available when the cut sheet feeder is used. 

1.  Press the ONLINE button. The printer returns to online mode, 

prints or feeds one line, and the PAPER OUT indicator lights up 
again. 

2.  Repeat this procedure until the full page is printed. Line 

spacings, however, may be uneven.