Fujitsu DL7400 Manual De Usuario

 

• 

 
 

• 

tion, you can 

m list. To move forward (print the 

n. To move backward (print the 

utton. 

• 

hi

enu or when selecting a 

ss the 

• 

To change the default, select and save a new pitch setting. 

•  While in setup mode, you can use the LIST function to print out 

a list of the currently selected options (see the next section for 
details). 

•  To exit setup mode and permanently save your changes, select 

the SAVE & END function. For details, see the section Exiting 
and Saving later in this chapter. To exit setup mode without 
saving your changes, turn the printer off. Your previous power-
on defaults are active when you turn the printer on again. 

 

The LIST function prints a list of all the printer’s currently selected 
options. This function is useful for checking the printer settings when 
you first enter setup mode or just before you exit. To print a list of 
options, load continuous forms paper and then proceed as follows: 

Press the AUTO GAP button and the HI IMPACT button 
simultaneously until the printer beeps. Wait for the printer to 
stop printing and check that the following <<FUNCTION>> 
menu is printed: 

 

<< FUNCTION >> 
SAVE&END MENU1    MENU2    HARDWRE  ADJUST   CONFIG   GAP-ADJ  DEFAULT  LIST     SELF-TST   
HEX-DUMP V-ALMNT  INITIAL 

Whenever you enter setup mode, short help menus are printed at
the top of the page. Help menus are also printed when you select
the SELF-TST, HEX-DUMP, or V-ALMNT functions. 

Use help menus for quick reference while in setup mode. 

When printing the items and options for each func
only print one item at a time. However, you can move either 
forward or backward in the ite
next item), press the T butto
previous item), press the S b

W le in the <<FUNCTION>> m
function that contains items and selectable options, pre
ONLINE button to reprint the <<FUNCTION>> menu. 

A short underline under the first two letters of an option 
indicates that it is the current default setting. For example, 12 
CPI indicates that 12 characters per inch is the default pitch.