Fujitsu FP-410 Manual De Usuario

16 

 
 

6-1. Preventing Paper Jams 

Do not touch the paper during ejection or before the paper is 
completely cut. 
Holding or pulling the paper by hand during ejection might cause a 
paper jam, incorrect cutting, or a feed error. 
 

6-2. Clearing a Paper Jam 

If a paper jam occurs, remove the jammed paper as follows: 
(1) Turn off the printer power by turning off the power switch. 
(2) Press the cover open lever down, and open the top cover. 
(3) Remove the jammed paper. 

Carefully remove the jammed paper so as to not damage the 
printer. In particular, do not touch the thermal print head because 
doing so might damage it. 

(4) Place the paper in the correct orientation, and carefully close the top 

cover. 

1.Place the paper in the correct orientation. If the top cover is closed 

while the paper is not correctly in place, a paper jam or 
misaligned printing might occur. 

2.To close the top cover, push the center of the cover until it locks 

securely. If the cover is locked but the cover open lever is pressed 
down, the cover is not completely locked. In this case, press the 
top cover again. If the cover is not completely locked, printing 
might be impossible. 

(5) Turn on the printer power by turning on the power switch. Confirm 

that the ERROR lamp is not lit. 

If the ERROR lamp is lit, print commands cannot be accepted. Be 
sure the top cover is securely locked.