Lexmark X342n Manual De Usuario

Close the top cover to avoid dark edges on the scanned image.

The MFP has two output locations: the front output tray and the rear paper exit. 

The front output tray should be used to output plain paper only. Use the rear paper exit for envelopes, 
labels, card stock, and transparencies. To use the front output tray, make sure the rear cover is 
closed.

This tray should be used for most jobs and is recommended for jobs requiring over 50 sheets of plain 
paper continuously. 

Note: If problems, such as excessive curl, occur when using the front output tray, try using 

the rear output slot.

You can use the rear paper exit for all paper types; however, for envelopes, labels, card stock, and 
transparencies, using this slot is recommended. To use the rear paper exit, open the rear cover.

Paper is output face-up through the rear paper exit, with the last page on the top. To avoid paper 
jams, do not open or close the rear cover while printing.

Rear paper exit

Front output 
tray