Konica Minolta SU2 Manual De Usuario
Performing a Scan to E-Mail Operation
7
PageScope Light & Scanner Mode
7-3
7
To change the file format or
coding method, touch [Scan
Mode], and then specify the
desired settings.
coding method, touch [Scan
Mode], and then specify the
desired settings.
8
Specify the image quality,
density and zoom ratio
according to the document
to be scanned.
density and zoom ratio
according to the document
to be scanned.
H
9
Press the [Start] key.
The transmission begins.
If the document is placed on the original glass:
G
When scanning multiple document pages, continue scanning by
placing each consecutive page on the original glass, then pressing the
[Start] key.
placing each consecutive page on the original glass, then pressing the
[Start] key.
G
After all pages of the document to be sent are scanned, touch [Scan
End], and then press the [Start] key. The transmission begins.
End], and then press the [Start] key. The transmission begins.
If the transmission could not be completed
G
The unit will automatically try again (auto redial) up to five more times
at one-minute intervals.
at one-minute intervals.
G
The number of auto redials and the interval can be specified. For
details, refer to "Specifiying Transmission Settings" in the Advanced
Information on the CD.
details, refer to "Specifiying Transmission Settings" in the Advanced
Information on the CD.
G
If the transmission could not be completed after auto redialing, a
transmission report is outputted.
Part of the first page of sent document is copied onto this report.
If it is not necessary to output the transmission report, change the
transmission report is outputted.
Part of the first page of sent document is copied onto this report.
If it is not necessary to output the transmission report, change the