Konica Minolta 2590 MF Manual De Usuario

LINE PROBLEM

(Flashing alter-

nately)
CHECK LINE

„

The telephone dialing 
system or telephone 
wiring system is not 
set correctly.

„

The telephone cable 
is not attached cor-
rectly.

„

Check the telephone dialing 
system or telephone wiring 
system and use the appropri-
ate configuration menu to 
make the correct settings.

„

Correctly connect the tele-
phone cable.

*COMM.ERROR*
(####)

„

Communication is not 
possible because of 
some problem in the 
machine.

„

Communication is not 
possible because of a 
problem with the 
recipient/caller’s fax 
machine.

Check the transmission results.

*REDIAL ALL FAILED* All redial attempts failed 

because either the recip-
ient’s line is busy or 
there was no answer.

Check the condition of the recipi-
ent’s line, and then try sending 
the fax again.

*MEM.FULL/TX CAN-
CEL*

While sending a fax, the 
size of the data for the 
scanned image has 
exceeded the capacity of 
memory.

Retrieve all received faxes stored 
in memory.

Send the fax by direct transmis-
sion.

To print an error report, press the 
Cancel/C key while an error 
message is displayed.

*MEM.FULL/RX CAN-
CEL*

While receiving a fax, 
the size of the data for 
the scanned image has 
exceeded the capacity of 
memory.

Retrieve all received faxes stored 
in memory.

To print an error report, press the 
Cancel/C key while an error 
message is displayed.

HANG UP THE 
PHONE

The receiver of the con-
nected telephone is 
lifted.

Replace the receiver of the con-
nected telephone on the hook.