KYOCERA 3050ci Manual De Usuario
Sending Functions
6-40
Use the procedure below to specify the Bates Stamp settings.
1
Press the Send key.
2
Place the originals on the platen.
3
Press [Advanced Setup] and then press [Bates
Stamp].
Stamp].
4
Press [On].
5
Press [Date], [User Name], [Serial Number],
[Numbering], [Text 1], or [Text 2], and set additional
information to be displayed with the stamp.
[Numbering], [Text 1], or [Text 2], and set additional
information to be displayed with the stamp.
If you selected [Text 1] or [Text 2], press [Change]
below it and enter the text string to be displayed.
below it and enter the text string to be displayed.
If you selected [Date], press [Date Format] and
select [MM/DD/YYYY], [DD/MM/YYYY], or [YYYY/
MM/DD] to set the date format.
select [MM/DD/YYYY], [DD/MM/YYYY], or [YYYY/
MM/DD] to set the date format.
If you selected [Numbering], press [Numbering
Default] and set the starting sequence number (1 to
9999999).
Default] and set the starting sequence number (1 to
9999999).
6
Press [Position] and select the position of the text
stamp.
stamp.
7
Press [Font] and select font and display settings for
the text stamp.
the text stamp.
8
Press [Original Orientation] to choose the
orientation of the originals, either [Top Edge on Top]
or [Top Edge on Left]. Then press [OK].
orientation of the originals, either [Top Edge on Top]
or [Top Edge on Left]. Then press [OK].
9
Press [OK].
10
Specify the destination, and press the Start key to
start sending.
start sending.
Status
Copies
Cancel
OK
Bates Stamp
Add Shortcut
On
Off
Stamp
Date
User Name
Numbering
Default
Position
Font
Original
Orientation
Each
Print Page
Top Left
pt
Black
9
Top Edge
on Top
Numbering
Text 1
Serial Number
Text 2
Delete
Text 1
Text 2
Change
Change
Date Format
[Date]
10/10/2010 10:10