Ricoh IS 2430 Manual De Usuario

When the Machine Does Not Operate As Wanted

When the Function Status Indicator Lights
Up in Red

When the function status indicator lights up in red, press the corresponding
function key, and then refer to the following table.

Problem

Cause

Solution

Documents and reports
do not print out.

The paper output tray is
full.

Remove the prints from the tray.

Documents and reports
do not print out.

There is no paper left.

An error has occurred.

The function whose indi-
cator is lit in red is defec-
tive.

Record the code number shown in the
display and contact your service repre-
sentative. See “When a Message is Dis-
played” of each chapter.

You can use other functions normally.

The machine is unable to
connect to the network.

A network error has oc-
curred.

• Check the displayed message and

take an appropriate action. See
“When a Message is Displayed” of
each chapter.

• Check that the machine is correctly

connected to the network, and that
the machine is correctly set. See
“Network Settings”, General Set-
tings Guide.

• Contact the administrator.

• If the function status indicator is still

lit in red even after trying to solve
the problem as described here, con-
tact your service representative.