Ricoh JP5000 Manual De Usuario
What To Do If Something Goes Wrong
188
4
Black Line/Stain
Check the platen cover and clean it if
dirty. See
dirty. See
Check the exposure glass (contact
glass) and clean it if dirty. See
glass) and clean it if dirty. See
“Exposure glass (contact glass)”.
Check the sheet of the optional docu-
ment feeder and clean it if dirty. See
Check the sheet of the optional docu-
ment feeder and clean it if dirty. See
Note
❒ When black lines or stains still ap-
pear on prints even if you clean the
above, contact your service repre-
sentative.
above, contact your service repre-
sentative.
Skipped Prints
If the machine is not used for a long
period of time or you change the color
drum unit, the ink on the drum might
dry causing print quality to deterio-
rate. To solve this problem, use Qual-
ity Start Mode. See
period of time or you change the color
drum unit, the ink on the drum might
dry causing print quality to deterio-
rate. To solve this problem, use Qual-
ity Start Mode. See
Start Mode— Regaining The Image Den-
sity When The Ink On The Drum Dries”.
When you get skipped print images
even if you use Quality Start mode,
perform the following procedure.
sity When The Ink On The Drum Dries”.
When you get skipped print images
even if you use Quality Start mode,
perform the following procedure.
A
Open the front cover and pull out
the drum unit.
the drum unit.
Reference
See
B
While pressing the drum lock,
grasp the edge of the master
(white part of the master) and
peel it off.
grasp the edge of the master
(white part of the master) and
peel it off.
C
Return the drum lock to its origi-
nal position.
nal position.
D
Set the drum unit until it clicks in
position and close the front cover.
position and close the front cover.
TPEH101E
TPEH200E
TPEH091E