Ricoh MP C2003 Manual De Usuario
Loading Paper into Paper Trays
Every paper tray is loaded in the same way.
In the following example procedure, paper is loaded into Tray 2.
In the following example procedure, paper is loaded into Tray 2.
•
(mainly Europe and Asia)
Tray 1 can hold A4 paper only. If you want to print on A5 , B5 JIS , or 8
1
/
2
× 11 from Tray
1, contact your service representative.
•
(mainly North America)
Tray 1 can hold 8
1
/
2
× 11 paper only. If you want to print on A4 , A5 , or B5 JIS from Tray
1, contact your service representative.
• Check the paper edges are aligned at the right side.
• If a paper tray is pushed vigorously when putting it back into place, the position of the tray's side
• If a paper tray is pushed vigorously when putting it back into place, the position of the tray's side
fences may slip out of place.
1.
Check that paper in the paper tray is not being used, and then pull the tray carefully out
until it stops.
until it stops.
CVA010
2.
Square the paper and load it print side up.
Do not stack paper over the limit mark.
CVA011
9. Adding Paper and Toner
144