Sharp MX-B201 Manual De Usuario
USER SETTINGS
77
* These menus are only effective when the optional MX-NB11 is installed.
20
LANGUAGE
1: AMERICAN
ENGLISH
2: ENGLISH
3: FRENCH
4: SPANISH
5: ------
:
3: FRENCH
4: SPANISH
5: ------
:
:
18: Brazilian
Portuguese
• This is used to set the language
used in the display.
21
RESET FACTORY
1: YES
2: NO
2: NO
• This is used to return all
settings to the factory default
settings.
settings.
22
SORT AUTO
SELECT
SELECT
1: ON
2: OFF
2: OFF
• Use this setting to enable or
disable sort auto select mode.
24
• CHECK OC
OPEN
• CHECK RSPF
OPEN (When an
RSPF is installed)
RSPF is installed)
1: ON
2: OFF
2: OFF
• You can set the operation that
takes place if the [START] key
(
(
) is pressed when the
original cover/RSPF is not
completely closed. (For details on
the "Check RSPF open function",
see page 10.)
completely closed. (For details on
the "Check RSPF open function",
see page 10.)
25
VALID COPY
WIDTH
WIDTH
1: A4
2: B5
2: B5
• Set the allowed paper sizes for
copying from the bypass tray.
When "B5" is selected, a copy
of an letter size original will only
be printed up to invoice size.
When "B5" is selected, a copy
of an letter size original will only
be printed up to invoice size.
28
LSU SETTING
1: ON
2: OFF
2: OFF
• Select whether copying is only
allowed when the polygon
motor is rotating, or also when
the polygon motor is stopped.
motor is rotating, or also when
the polygon motor is stopped.
29
PAPER TYPE
1: PLAIN PAPER
2: HEAVY
2: HEAVY
PAPER
• Set the temperature of the
fusing unit when the bypass tray
is used.
is used.
30
DISPLAY
CONTRAST
CONTRAST
1: LIGHTER
2: LIGHT
3: NORMAL
4: DARK
5: DARKER
2: LIGHT
3: NORMAL
4: DARK
5: DARKER
• Set the contrast of the display.
31*
DATE & TIME SET
• Set the date and time to be
used for fax or other purpose.
32*
DATE & TIME
FORMAT
FORMAT
1: TIME FORMAT
1: 12-HOUR
2: 24-HOUR
2: 24-HOUR
• Select the time format of 12
hours or 24 hour pattern.
2: DATE
FORMAT
1: MMDDYYYY
2: DDMMYYYY
3: YYYYMMDD
2: DDMMYYYY
3: YYYYMMDD
• Select the date format among
the 3 patterns.
Program
number
Program name
Setting codes
(factory default
(factory default
setting appears
in bold)
Explanation