Sharp MX-M260 Manual De Usuario
140
PERIPHERAL DEVICES AND SUPPLIES
FINISHER (MX-FN13)
The finisher is equipped with the offset function, which offsets each set of output from the previous set.
In addition, each set of sorted output can be stapled.
In addition, each set of sorted output can be stapled.
Part names
The following parts can be accessed when the finisher is open.
(1)
Offset tray
Stapled and offset output is delivered to this tray.
The tray is slidable. Extend the tray for large output
( A3, A4R, B4, 11" x 17", 8-1/2" x 14", 8-1/2" x 13",
8-1/2" x 11"R, 7-1/4" x 10-1/2"R sizes).
The tray is slidable. Extend the tray for large output
( A3, A4R, B4, 11" x 17", 8-1/2" x 14", 8-1/2" x 13",
8-1/2" x 11"R, 7-1/4" x 10-1/2"R sizes).
(2)
Lever
Use this to move the finisher in order to remove a
paper misfeed, replace staples, or remove a staple
jam.
paper misfeed, replace staples, or remove a staple
jam.
(3)
Front cover
Open this cover to remove a paper misfeed, replace
staples or remove a staple jam.
staples or remove a staple jam.
(4)
Staple case
This holds the staple cartridge. Pull the case out to
replace the staple cartridge or remove a staple jam.
replace the staple cartridge or remove a staple jam.
(5)
Staple case release lever
Use this to remove the staple case.
Specifications
(1)
(5)
(4)
(2)
(3)
MX-FN13
Tray capacity
500 sheets (250 sheets for sizes larger than A4R (8-1/2" x 11"R))
Paper size
Size
A6R to A3 (5-1/2" x 8-1/2" to 11" x 17")
Weight
56 g/m
2
to 200 g/m
2
(15 lbs. to 54 lbs.)
Offset
1-3/16" (30 mm) (Offset Tray)
Paper sizes that can be
stapled
stapled
A3, B4, A4, A4R, B5, B5R (11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11",
8-1/2" x 11"R)
8-1/2" x 11"R)
Stapling capacity
A4, A4R, B5, B5R, 8-1/2" x 11", 8-1/2" x 11"R:
50 sheets (80 g/m
50 sheets (80 g/m
2
(21 lbs.))
A3, B4, 11" x 17", 8-1/2" x 14", 8-1/2" x 13":
30 sheets (80 g/m
30 sheets (80 g/m
2
(21 lbs.))
Power supply
Drawn from the machine
Weight
Approx. 14.4 kg (31.8 lbs.)
Dimensions
472 mm (W) x 461 mm (D) x 199 mm (H) (18-37/64" (W) x 18-5/32" (D) x 7-27/32" (H) )
(Normal)
619 mm (W) x 461 mm (D) x 199 mm (H) (24-3/8" (W) x 18-5/32" (D) x 7-27/32" (H))
(Tray extended)
(Normal)
619 mm (W) x 461 mm (D) x 199 mm (H) (24-3/8" (W) x 18-5/32" (D) x 7-27/32" (H))
(Tray extended)
• As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification
changes for product improvement without prior notice. The performance specification figures indicated are
nominal values of production units and there may be some deviations from these values in individual units.
nominal values of production units and there may be some deviations from these values in individual units.
• Use caution when you turn on the power and when printing is taking place, as the offset tray may move up and
down.
Note