OKI 3640e MFP Manual De Usuario
ES3640e MFP User’s Guide
Appendix F – Scanner unit setup details - 201
Administrator setup
NOTE
The Administrator password is required.
The Administrator password is required.
Press the Administrator Setup button (6) to gain access to the
following:
following:
>
Power Save Mode
Enable/disable power save mode.
>
Password for Administrator
Set MFP administrator password. The default is “”.
>
Access Control
Enable/disable PIN (Personal Identification Number)
authentication. If the PIN authentication is enabled, each
user is authenticated by the last 4 digits of ID for Job
Accounting. The PIN is provided by the Job Accounting
Utility.
authentication. If the PIN authentication is enabled, each
user is authenticated by the last 4 digits of ID for Job
Accounting. The PIN is provided by the Job Accounting
Utility.
>
Scan to E-Mail
Enable/disable SCAN TO E-MAIL.
>
Scan to FTP
Enable/disable SCAN TO FTP.
>
Proxy Settings
>
Server Name: Set FTP proxy server name or IP
address.
address.
>
User Name: Set user name for the proxy server.
>
Port Number: Set port number of the proxy server.
>
LDAP Settings
>
Server Name: Set LDAP server name or IP address.
>
Port Number: Set the port number of LDAP.
>
Timeout: Set the time out in seconds (10 – 120sec) for
the search.
the search.
>
Max. Entries: Set the maximum number of E-Mail
addresses that the MFP unit can receive in each search.
The Clear button resets this value to the default.
addresses that the MFP unit can receive in each search.
The Clear button resets this value to the default.