OKI C710N Manual De Usuario

Your printer will handle a variety of print media, including a range 

of paper weights and sizes, transparencies and envelopes. This 

section provides general advice on choice of media, and explains 

how to use each type.
The best performance will be obtained when using standard 20-lb. 

(75 g/m²) paper designed for use in copiers and laser printers. 
Use of heavily embossed or very rough textured paper is not 

recommended.
Pre-printed stationery can be used, but the ink must not offset 

when exposed to the high fuser temperatures used in the printing 

process.
Envelopes should be free from twist, curl or other deformations. 

They should also be of the rectangular flap type, with glue that 

remains intact when subjected to hot roll pressure fusing used in 

this type of printer. Window envelopes are not suitable.
Transparencies should be of the type designed for use in copiers 

and laser printers. In particular, avoid office transparencies 

designed for use by hand with marker pens. These will melt in the 

fuser and cause damage.
Labels should also be of the type recommended for use in copiers 

and laser printers, in which the base carrier page is entirely 

covered by labels. Other types of label stock may damage the 

printer due to the labels peeling off during the printing process.

• Letter
• Legal 13 inch, 13.5 inch, 14 inch
• Executive
• A4,  A5
• A6: tray 1 only
• B5
• Custom Sizes: 5.5” to 8.5 inches wide x 8.3” to 14” long. Custom 

sizes must be predefined in the driver.