OKI C710N Manual De Usuario

It should be noted that many of these settings can be, and often 

are, overridden by settings in the Windows printer drivers. 

However, several of the driver settings can be left at “Printer 

Setting”, which will then default to the settings entered in these 

printer menus.
Where applicable, factory default settings are shown in bold type 

in the following tables.
In the normal operating condition, known as “standby,” the 

printer’s LCD window will show “Ready to Print”. In this condition, 

to enter the menu system, press the up and down Menu buttons 

on the operator panel to move up and down through the list of 

menus until the menu you wish to view is displayed. Then proceed 

as follows:
1.

Press Enter to enter the menu.

Use the up and down MENU buttons on the control panel to 

scroll through the menus. When the item you want to change 

is displayed, press Enter to view the sub-menus for that 

item.

Use the up and down MENU buttons to move up and down 

through the sub-menu items. When the item you want to 

change is displayed press Enter to display the setting.

Use the up and down MENU buttons to move up and down 

through the available settings for the sub-menu item. When 

the item you want to change is displayed press Enter to 

display the setting. An asterisk (*) will appear next to the 

setting, indicating that this setting is currently in effect.

Do one of the following:
• Press Back again to move up to the list of menus;
or…
• Press On Line or Cancel to exit from the menu system 

and return to standby.