OKI C710N Manual De Usuario
50
– C710n
User’s
Guide
Calibration
ITEM
SETTI
NGS
NGS
EXPLANATION
Auto Density
On/Off
Enables/disables automatic
density adjustment.
density adjustment.
Adjust
Density
Density
Execute
If Execute is selected, the
printer will immediately adjust
density and reflect it in TRC
compensation.
This adjustment must be
executed when the printer is
idling. It can become invalid
if executed in any other
state.
printer will immediately adjust
density and reflect it in TRC
compensation.
This adjustment must be
executed when the printer is
idling. It can become invalid
if executed in any other
state.
Adjust
Registration
Registration
Execute
When this menu is selected, the
printer performs AutoAdjust
Registration.
This adjustment must be
executed when the printer is
idling.
printer performs AutoAdjust
Registration.
This adjustment must be
executed when the printer is
idling.
Print Tuning
Pattern
Pattern
Execute
Prints the pattern for the user
to adjust TRC. Ordinarily, this
function is not needed because
TRC is automatically adjusted to
the recommended levels
through density adjustment and
TRC compensation.
Adjustment results will be
reflected as offset values
(addition) to the corrections
through the Adjust Density/TRC
Compensation function.
to adjust TRC. Ordinarily, this
function is not needed because
TRC is automatically adjusted to
the recommended levels
through density adjustment and
TRC compensation.
Adjustment results will be
reflected as offset values
(addition) to the corrections
through the Adjust Density/TRC
Compensation function.