OKI C710N Manual De Usuario

10. Holding the complete assembly by its top centre, lower it into 

place in the printer, locating the pegs at each end into their 

slots in the sides of the printer cavity.

11. Finally, close the top cover and press down firmly at both 

sides so that the cover latches closed.

The belt unit is located under the four image drums. This unit 

requires replacement approximately every 60,000 pages.
Switch off the printer and allow the fuser to cool for about 

10 minutes before opening the cover.

Note:
If you need to return or transport your printer for any 

reason, please make sure you remove the image drum 

unit beforehand and place in the bag provided. This is to 

avoid toner spillage.