Savin DSc338 Manual De Usuario
User Tools (Copier/Document Server Features)
124
5
Input/Output
❖
❖
❖
❖ Switch to Batch (SADF)
You can select to have the Batch or
SADF function displayed when
you press [Special Original]. See p.15
“Batch”.
SADF function displayed when
you press [Special Original]. See p.15
“Batch”.
Note
❒ Default: Batch
❖
❖
❖
❖ SADF Auto Reset
In SADF mode, an original must be
set within a specified time after the
previous original has been fed.
You can adjust this time from 3 sec-
onds to 99 in 1 second increments.
set within a specified time after the
previous original has been fed.
You can adjust this time from 3 sec-
onds to 99 in 1 second increments.
Note
❒ Default: 5 seconds
❖
❖
❖
❖ Rotate Sort: Auto Paper Continue
You can continue copying when
paper of the required orientation
has run out during rotate-sorting.
See p.43 “Rotate Sort”.
paper of the required orientation
has run out during rotate-sorting.
See p.43 “Rotate Sort”.
Note
❒ If you select [No] :
• When paper of the required
orientation runs out, the ma-
chine stops copying and
prompts you to supply copy
paper. When you load paper,
the machine will continue
copying.
chine stops copying and
prompts you to supply copy
paper. When you load paper,
the machine will continue
copying.
❒ If you select [Yes] :
• Copying continues using
copy paper of a different ori-
entation. The copy job will
finish even if the machine is
left unattended.
entation. The copy job will
finish even if the machine is
left unattended.
❒ Default: No
❖
❖
❖
❖ Auto Sort
You can specify whether the Sort
function is to be selected when the
machine is turned on, or when the
functions are cleared.
function is to be selected when the
machine is turned on, or when the
functions are cleared.
Note
❒ Default: No
❖
❖
❖
❖ Memory Full Auto Scan Restart
If memory becomes full while
scanning originals, the machine
will copy the scanned originals
first, and then automatically pro-
ceed scanning remaining originals.
You can enable or disable this
function.
scanning originals, the machine
will copy the scanned originals
first, and then automatically pro-
ceed scanning remaining originals.
You can enable or disable this
function.
Note
❒ If you select [No] :
• When memory becomes full,
the machine stops operation,
allowing you to remove the
copies on the output tray.
allowing you to remove the
copies on the output tray.
❒ If you select [Yes] :
• You can leave the machine
unattended to make copies,
but sorted pages will not be
sequential.
but sorted pages will not be
sequential.
❒ Default: No
❖
❖
❖
❖ Select Stack Function
Specify whether Stack or Rotate
Sort has priority on the initial dis-
play.
Sort has priority on the initial dis-
play.
Note
❒ Default: Stack
❒ An 2 tray finisher or booklet fin-
❒ An 2 tray finisher or booklet fin-
isher is required to use this
function.
function.
0827JupiterC1_Copy_EN_F1_FM.book Page 124 Thursday, September 4, 2003 5:06 PM