OKI 460 Manual De Usuario

41 • Configuring  your  machine

Your MFP has to be set up properly to allow faxing from the machine. The following 

parameters must be set before using the fax function:
• Date and time
• Country code
• Local phone number
• Sender ID
See “Initial set up” on page 64 for details.

The MFP must also be set up properly on your network to perform scan to e-mail and 

other functions. In order for other network devices to find the MFP on the network, 

the following network parameters have to be set.
1. IP Address Set:
2. IP Address:.    .    .
3. Subnet Mask:.    .    .
4. Gateway Address:.    .    .
5. DNS Server:.    .    .
6. SMTP Server:.    .    .
7. SMTP Port:25
8. POP3 Server:.    .    .
9. POP3 Port:110 

1. IP Address Set:

Choose Auto to obtain IP/subnet/gateway addresses automatically from DHCP 

server. After changing setting from Manual to Auto, the MFP will automatically 

reboot the network card.

2. IP Address:

The Internet Protocol (IP) address assigned to your machine by your network 

administrator.

Note
If you ran the Oki driver installer program from the CD-ROM you may 

have already set the time zone, date and time (Windows only) via the 

Panel Language Setup utility.