Samsung Msys 835P Manual De Usuario
O
THER
W
AYS
T
O
F
AX
7.16
Managing Department
Turning the Department Mode On or Off
You can select to enable or disable the department control
mode. When the department control mode is executed, only one
who enters correct Department code can use the machine.
mode. When the department control mode is executed, only one
who enters correct Department code can use the machine.
1
Press Menu and then
or
repeatedly until
“DEPARTMENT CODE” appears on the display, then press
Enter.
Enter.
2
Enter the master code using the number keypad, then press
Enter.
Enter.
If you enter wrong code, “CODE MISMATCH! TRY AGAIN”
appears in the display. Try again with the correct code.
appears in the display. Try again with the correct code.
3
Press Enter when “MANAGEMENT“ appears on the lower
line of the display.
line of the display.
The LCD display shows:
4
To enable the department control mode, press
1
.
To disable the department control mode, press 2.
5
Press Enter.
To return to Standby mode, press Stop/Clear.
When the department control mode is enabled, the Standby
display shows:
display shows:
Unless you enter the correct department code, you cannot
use any feature except receiving.
use any feature except receiving.