Samsung Msys 835P Manual De Usuario

G

ETTING

 S

TARTED

2.9

If you press the SAVE Paper button before pressing Copy/
Start, the product prints 2 pages on a single sheet of paper to 
save paper. To turn this feature on, take the following steps:

Press SAVE Paper. The display shows the current setting 
on the bottom line.

Press SAVE Paper or use the navigation buttons to change 
the setting. To enable the Paper Save mode, select “ON.” Or 
select “OFF” to disable the mode.

Make the desired copy setting, and press Copy/Start.

If no copy job is implemented in some minutes after you 
enable the Paper Save mode, the product automatically 
clears 2-up copy mode and get into the normal copy mode.

The Power Save mode allows the printer to reduce power 
consumption when it is not in actual use. To turn the Power Save 
mode on, take the following steps:

Press SAVE Power. The display shows the current setting 
on the bottom line.

Press SAVE Power or use the navigation buttons to change 
the setting. To enable the Power Save mode, select “ON.” Or 
select “OFF” to disable the mode.

You can further select the length of time the product waits after 
a  job is printed before it switches to a reduced power state.

Press and hold the SAVE Power button. 

The available time settings appear on the display and the 
current setting blinks. The available options are 5, 10, 15, 
30, and 45 (minutes). Press the navigation buttons until the 
desired time blinks. 

Press Enter to save the selection. 

To return to Standby mode, press Stop/Clear.