Samsung Msys 835P Manual De Usuario
R
ECEIVING
A
F
AX
5.4
Receiving Automatically in ANS/
FAX Mode
FAX Mode
For this mode, you must attach an answering machine to the
EXT jack on the back of your product.
EXT jack on the back of your product.
1
Press Menu and then
or
repeatedly until “SYSTEM
SETUP” appears on the display, then press Enter.
The display shows “RECEIVE MODE” on the top line and the
current setting on the lower line.
current setting on the lower line.
2
Press
or
until you see “ANS/FAX” on the lower line,
then press Enter to save the selection.
3
When you receive a call, the answering machine will
answer.
answer.
If the caller leaves a message, the answering machine
stores the message as it would normally. If your product
hears a fax tone on the line, it automatically starts to
receive fax.
stores the message as it would normally. If your product
hears a fax tone on the line, it automatically starts to
receive fax.
N
OTES
:
• If you have set your product to ANS/FAX mode and your
answering machine is switched off, or no answering machine is
connected to your product, your product will automatically go
into FAX mode after a predefined number of rings.
connected to your product, your product will automatically go
into FAX mode after a predefined number of rings.
• If your answering machine has a ‘user-selectable ring counter’,
set the product to answer incoming calls within 1 ring.
• If you are in TEL mode (manual reception) when the answering
machine is connected to your product, you must switch off the
answering machine, or the outgoing message from the
answering machine will interrupt your phone conversation.
answering machine, or the outgoing message from the
answering machine will interrupt your phone conversation.