OKI OL610EPS Manual De Usuario

                                                                                                                                                
3.3.3 LED Head
(1) Open the stacker cover.
(2) Remove the flexible cable (LED) 1 from the PC connector 2 of the LED head 3.
(3) Remove the LED head by flexing the left side of the upper cover away from the retaining clip. 

Be careful to not lose the frame ground clip 4.

• Be sure not to directly touch or push the SLA (lens) part of the LED head.

• After mounting the new LED head, set drive time of the LED head according to the marking on the LED 
head (see 4.2.1).
• For the installation of the flexible cable (LED) 1, install the PC connector 2 to the flexible cable (LED) 1 
first, then connect the LED head 3 to the PC connector.
• When installing a new LED head, be careful not to lose the frame ground clip 4.

OKI OL600/610ex (96-01-18