OKI OL610EPS Manual De Usuario

                                                                                                                                                
3.3.13 Fusing Unit Assy
(1) Remove the upper cover (see 3.3.1).
(2) Remove the stacker cover assy (see 3.3.10).
(3) Remove four screws 1 and remove the fusing unit 2.

Fusing unit assy may be hot. Use care when handling.

• When installing or removing the fusing unit assy, tighten or loosen the screws while holding the 

fusing unit down with your hand. • When reinstalling screws 1 , be sure to direct the screws into the 
pre-existing hole to avoid damaging the threads. • Do not apply excessive torque when tightening the 
screws 1; if these screws are stripped, the entire lower unit assembly must be replaced. • When 
reinstalling the fuser, insert the left side first, then lower the right side into place.

OKI OL600/610ex (96-01-18