OKI ii Manual De Usuario

To use Internet Fax, a network card must be installed in this machine and
connected to a LAN. The network card for this machine can be connected
to a 10BaseT or 10/100baseTX LAN. Also, to make a LAN connection,
an IP Address, Subnet Mask and Default Gateway must be configured on
this fax machine. Ask the network administrator for these settings. 

If the LAN uses a DHCP server, it is not necessary to configure these set-
tings as the server will do it automatically.

Internet Fax settings can be configured either using the network tool or on
the fax machine itself, but DHCP settings are supported by the network
tool only.

After setting the correct IP Address, Subnet Mask and Default Gateway,
configure the fax machine for Internet Fax transmission/reception.

To send an Internet Fax message, a mail server is required from which to
send email. Please consult the network administrator about the settings
listed below, which are required in order to make a connection to the mail
server.

These settings are similar to those of popular mail clients such as Netscape
Messenger, Outlook and Eudora.

•

SMTP Server Address /Name - Enter the SMTP server name or IP
Address. If entering the server's IP Address, be sure to type the dots
(full-stops) dividing the numbers as well (e.g., 192.168.1.1). Enter a
server name only if a DNS server has been configured.

•

DNS server's IP ADDRESS - This setting is not required if the SMTP
server has been specified by its IP ADDRESS. A DNS server can
convert a server name into an IP ADDRESS.