Samsung SCX-4X26 Manual De Usuario

Maintenance

When the Toner Empty message appears you can configure not to see this 

message again not to disturb you.
1.

Press Menu until System Setup appears on the bottom line of the 

display and press OK.

Press the Scroll buttons until Maintenance appears and press OK.

Press the Scroll buttons until CLR Empty Msg. appears and press OK.

Select On and press OK.

Now the Toner Empty  message does not appear but the Replace 
Toner

 message will remain for reminding you that the new cartridge 

needs to be installed for quality.

To avoid print quality and paper feed problems resulting from worn parts, 

and to maintain your machine in top working condition the following 

condition, the following items will need to be replaced after the specified 

number of pages, or when the life span of each item has expired. 

 

We highly recommend that this maintenance be performed by an authorized 

service provider, dealer or the retailer where you bought the machine. The 

warranty does not cover the replacement of the maintenance parts after 

their lifespan.

If you experience frequent paper jams or printing problems, check the 

number of pages the machine has printed or scanned. Replace the 

corresponding parts, if necessary.
1.

Press Menu until System Setup appears on the bottom line of the 

display and press OK.

Press the left/right arrow until Maintenance appears and press OK.

Press the left/right arrow until Supplies Life appears and press OK.

Press the left/right arrow until the item you want appears and press OK.
•

Prints the supply information page.

Displays the total number of pages printed.

Displays the number of pages scanned using the ADF.

Displays the number of pages scanned using the 

scanner glass.

Displays the number of pages printed each item.

If you selected to print a supply information page, press OK to confirm.

Press Stop/Clear to return to ready mode.

You will need to replace the ADF rubber pad when there seems to be a 

consistent problem with paper pickup or when its specified yield is reached.
1.

Open the ADF cover.

Rotate the bushing on the right end of the ADF roller toward the ADF 

and remove the roller from the slot.

Remove the ADF rubber pad from the ADF, as shown.

Insert a new ADF rubber pad into place.

•

Once you have selected On, this setting will be permanently 

written to the memory of the toner cartridge, and this menu will be 

disappeared from the Maintenance menu.

•

You can keep printing but the quality cannot be guaranteed, and 

the product support is no longer provided. 

Approx. 50,000 pages

Approx. 20,000 pages

Approx. 20,000 pages

Approx. 50,000 pages

Approx. 50,000 pages