Samsung Msys 830 Manual De Usuario
A
DDITIONAL
F
EATURES
8.6
RX REDUCTION
When receiving a document as long as or longer than the
paper installed in your product, the product can reduce
the size of the document to fit the size of paper loaded in
the product. Select ON if you want to automatically reduce
an incoming page. You can set the Horizontal Reduction.
With Horizontal Reduction enabled, the product reduces
an incoming document along the vertical axis only.
paper installed in your product, the product can reduce
the size of the document to fit the size of paper loaded in
the product. Select ON if you want to automatically reduce
an incoming page. You can set the Horizontal Reduction.
With Horizontal Reduction enabled, the product reduces
an incoming document along the vertical axis only.
With this feature set to OFF, the product cannot reduce
the document to fit onto one page, the document is
divided and printed in actual size on two or more pages.
the document to fit onto one page, the document is
divided and printed in actual size on two or more pages.
DISCARD SIZE
When receiving a document as long as or longer than the
paper installed in your product, you can set the product to
discard any excess at the bottom of the page. If the
received page is outside the margin you set, it will print on
two sheets of paper at the actual size.
paper installed in your product, you can set the product to
discard any excess at the bottom of the page. If the
received page is outside the margin you set, it will print on
two sheets of paper at the actual size.
If the document is within the margin, and the RX
Reduction feature is turned ON, it will be reduced to fit
into the appropriate size paper (Discard does occur). If
the Auto Reduction feature is turned OFF or fails, the data
within the margin will be discarded. Settings range from 0
to 30 mm.
Reduction feature is turned ON, it will be reduced to fit
into the appropriate size paper (Discard does occur). If
the Auto Reduction feature is turned OFF or fails, the data
within the margin will be discarded. Settings range from 0
to 30 mm.
REDIAL INTERVAL
Your product can automatically redial a remote fax
machine if it was busy. Intervals from 1 to 15 minutes can
be entered.
machine if it was busy. Intervals from 1 to 15 minutes can
be entered.
REDIALS
Specifies the number of redial attempts (0 to 13). If you
enter 0, the product will not redial.
enter 0, the product will not redial.
ANSWER ON RINGS
Specifies the number of times the product rings (1 to 7)
before answering an incoming call.
before answering an incoming call.
SEND FROM MEMORY
When enabled, all fax transmission documents are
automatically scanned into memory. It will not be
necessary to wait until documents in the Automatic
Document Feeder are sent before you can send or store
other fax jobs.
automatically scanned into memory. It will not be
necessary to wait until documents in the Automatic
Document Feeder are sent before you can send or store
other fax jobs.
LOCAL ID
When enabled, the product automatically prints the page
number and date and time of reception at the bottom of
each page of a received document.
number and date and time of reception at the bottom of
each page of a received document.
CLOCK MODE
You can configure the product to display time using either
a 12-hour or 24-hour format.
a 12-hour or 24-hour format.
Option
Description