Samsung SCX-5115 Manual De Usuario

T

ROUBLESHOOTING

8.13

The following chart lists some conditions that may occur and the 
recommended solutions. Follow the suggested solutions until 
the problem is corrected. If the problem persists, please contact 
a service engineer.

TONER EMPTY

The toner cartridge has 
run out. The machine 
stops.

Replace with a new toner 
cartridge. See page 7.3.

TONER LOW

The toner is almost 
empty.

Take out the toner cartridge and 
gently shake it. By doing this, you 
can temporarily re-establish 
printing operations.

The LCD does not turn on.

Check that the machine is plugged into an electrical 
supply.
Ensure that there is power to the socket where the 
unit is plugged in to and that the machine power 
switch is in the ON position.

The machine beeps an error 
sound and does not make a 
copy.

Make sure that the machine is in copy mode. If not, 
change the mode to the Copy mode by pressing 
Mode/Enter. 

Copies are too light or too 
dark.

If the original is light, use the Contrast button to 
darken the background of the copies.

If the original is dark, use the Contrast button to 
lighten the background of the copies.

Smears, lines, marks, or 
spots on copies.

If the detects are on the original, press the Contrast 
button to lighten the background of your copies.

If no defects are on the original, clean the document 
glass and underside of the document cover.

White or black lines on 
your copy.

Check to see if the temperature is too low. When it 

is lower than 10 

o

C , copy your document 1 hour 

after you turn the machine on.