Samsung SCX-5115 Manual De Usuario

C

OPYING

4.12

When the document is fed from the document glass, the 
display shows “SCAN SIDE 2?” on the top line after the 
page is scanned into the memory. To scan another page, 
remove the scanned page and load the next page on the 
glass. Select “YES” and press Mode/Enter. 

After scanning, the machine starts printing automatically. 
Then the display shows "SCAN ANOTHER?". To scan another 
page, select "YES" and press Mode/Enter. 

When the display shows "SCAN SIDE2?" again, repeat as 
necessary.

When all of the pages are scanned, select “NO” when the 
display shows “SCAN SIDE 2?” or “SCAN ANOTHER ?” and 
press Mode/Enter.

When the copying is completed, press Stop/Clear to 
cancel the duplex copy mode.

When the Collation Copying feature is on, your machine sorts 
the copy job. For example, if you make 2 copies of 3 pages 
documents, one complete 3 page document will print followed 
by the second complete 3 page document.

Load the documents to be copied in the ADF.

Or, place a sheet of the documents on the document glass 
face down.

Make sure that you have selected the required paper tray. 
See page 4.2.

To enter collation copy mode, SCX-5315F users should 
press Special Copy in the Copy mode (see page 4.3). 
Press Special Copy or use the navigation buttons until 
“COLLATION” appears on the bottom line of the display.

SCX-5115 users should press Collation Copy, and press 
Collation Copy or the navigation buttons to select “ON” to 
turn this feature on.