Samsung SLC460FWXAA Hoja De Datos

The machine is calibrating 
the image density. 

Wait a few minutes.

The cover is not securely 
latched.

Close the cover until it 
locks into place. 

The scan unit is not securely 
latched or paper has 
jammed in the scanner area.

•

Clear the jam (see 
"Clearing original 
document jams" on 
page 95).

•

Close the cover until it 
locks into place. 

The cover of scanner is not 
securely latched.

Close the cover until it 
locks into place. 

Error [error number]

Install [color] toner

The indicated toner 
cartridge is installed 
improperly, or the connector 
is polluted.

Reinstall the Samsung-
genuine toner cartridge 
two or three times to 
confirm it is seated 
properly. Or clean the 
connector. If the problem 
persists, contact the 
service representatives.

The machine unit cannot be 
controlled.

Reboot the power and try 
the printing job again. If 
the problem persists, 
please call for service. 

The scanner is locked.

Reboot the power. If the 
problem persists, please 
call for service.

The transfer belt is not 
installed.

Install a Samsung-
genuine transfer belt.

The transfer belt of the 
machine is not for your 
machine.

Install the a Samsung-
genuine part designed 
for your machine.

The waste toner container is 
not installed.

Install a Samsung-
genuine waste toner 
container.

The fax line is not properly 
connected to the LINE port.

Connect the fax line to 
the LINE port not to the 
EXT port (see "Rear view" 
on page 23).

The machine is in a room 
with improper room 
temperature. 

Move the machine to a 
room with proper room 
temperature.

The output tray is full. Or the 
sensor is not facing down.

Remove papers from the 
output tray, the machine 
resumes printing. Or 
make sure the sensor is 
facing down. If the 
problem persists, call for 
service.