Samsung SLC460FWXAA Hoja De Datos

Wireless network setup

161

2. Using a Network-Connected Machine

You can change the WPS mode in control panel (

(Menu)) > Network >

Wireless > OK > WPS Setting).

Machines with a display screen

Connecting in PBC mode

Press and hold the

(WPS) button on the control panel for more than

2 seconds.

The machine starts waiting for up to two minutes until you press the WPS
(PBC) button on the access point (or wireless router).

Press the WPS (PBC) button on the access point (or wireless router).

The messages are displayed on the display screen in the order below:

a Connecting:

The machine is connecting to the access point (or

wireless router).

b Connected:

When the machine is successfully connected to the

wireless network, the WPS LED light stays on.

c AP

SSID:

After completing the wireless network connection process,

the AP’s SSID information appears on the display.

Insert the supplied software CD into your CD-ROM drive, and follow the
instructions in the window to set up the wireless network.

Connecting in PIN mode

Press and hold the

(WPS) button on the control panel for more than

2 seconds.

The eight-digit PIN appears on the display.

You need to enter the eight-digit PIN within two minutes on the
computer that is connected to the access point (or wireless router).

The messages are displayed on the display screen in the order below:

a Connecting:

The machine is connecting to the wireless network.

b Connected:

When the machine is successfully connected to the

wireless network, the WPS LED light stays on.

c SSID

Type:

After completing the wireless network connection

process, the AP’s SSID information is displayed on the LCD display.

Insert the supplied software CD into your CD-ROM drive, and follow the
instructions in the window to set up the wireless network.