Samsung SLC460FWXAA Hoja De Datos

Select the one Network Name(SSID) in the list.

•

SSID: SSID (Service Set Identifier) is a name that identifies a wireless 
network, access points, and wireless devices attempting to connect 
to a specific wireless network must use the same SSID. The SSID is 
case sensitive.

•

Operation Mode: Operation Mode refers to the type of wireless 
connections (see "Wireless network name and network password" 
on page 157).

-

Ad-hoc: Allows wireless devices to communicate directly with 
each other in a peer-to-peer environment.

-

Infrastructure: Allows wireless devices to communicate with 
each other through an access point.

 

If your network’s Operation Mode is Infrastructure, select the SSID of the 
access point. If the Operation Mode is Ad-hoc, select the machine’s SSID. 

 

Click Next.

If the wireless security setting window appears, enter the registered 
password (network password) and click Next.

The confirmation window appears, please check your wireless setup. If 
the setup is right, click Apply.

 

Disconnect the network cable (standard or network). Your machine should 
then start communicating wirelessly with the network. In case of Ad-hoc 
mode, you can use a wireless LAN and wired LAN simultaneously.

 

Insert the supplied software CD into your CD-ROM drive, and follow the 
instructions in the window to set up the wireless network.

18 

 

If your machine has a display, you can also turn on/off the Wi-Fi from the 
machine’s control panel using the Network menu.

 

Check whether the network cable is connected to the machine. If not, 
connect the machine with a standard network cable.

Start a web browser such as Internet Explorer, Safari, or Firefox and enter 
your machine’s new IP address in the browser window.

For example,

Click Login on the upper right of the SyncThru™ Web Service website.