Samsung SCX-5835NX Manual De Usuario

Machine status and advanced feature_ 90

You can also print the machine's status information and browse status 

with SyncThru™ Web Service. Open the Web browser on your 

networked computer and type the IP address of your machine. When 

SyncThru™ Web Service opens, click Information > Print 

information.

The control panel provides access to various menus to set up the machine 

or use the machine's functions. These menus can be accessed by pressing  

Machine Setup, Job Status, or touching menus on the display screen. 

Refer to the following table.

Some menus may not appear in the display depending on options or 

models. If so, it is not applicable to your machine. 

The main screen is shown on the display screen on the control panel. Some 

menus are grayed out depending on your model.

You can set to print the 

information of a fax reports. 

•

Multi Send Report:  When 

you fax to several destinations, 

set this option to print a 

transmission report. Select On 

to print out a confirmation 

report every time you send a 

fax. Select On-Error to print 

out a report only when a 

transmission error occurs. 

•

Appearance:  You can select 

whether the image on the 

confirmation report shows or 

not.

•

Fax Sent/Received Report: 
Select On to have the machine 

store all transmission logs and 

print out after every 50 logs. 

Select Off to have the machine 

store the log but not print out.

•

Fax Send Report:  The 

machine prints the 

confirmation report after each 

fax job, only when you send a 

fax to one destination.

The report shows the job of 

scanning and sending it via Scan 

to Email.

•

On:  A report is printed 

whether a job is successfully 

completed or not.

•

Off:  No report is printed.

•

On-Error:  A report is printed 

only when an error occurs.

The report shows the job of 

scanning and sending it via SMB 

and FTP.

•

On:  A report is printed 

whether a job is successfully 

completed or not.

•

Off:  No report is printed.

•

On-Error:  A report is printed 

only when an error occurs.