Samsung SCX-4216F Manual De Usuario

T

ROUBLESHOOTING

8.26

Message appears on your computer 
screen:
• “Device can't be set to the H/W 

mode you want.”

• “Port is being used by another 

program.”

• “Port is Disabled.
• “Scanner is busy receiving or 

printing data. When the current 
job is completed, try again.”

• “Invalid handle.”
• “Scanning has failed.”

• There may be a copying or printing job in 

progress. When the current job is complete, 
try the job again.

• The Selected port is currently being used. 

Restart your computer and try again.

• The printer cable may be improperly 

connected or the power may be off. You 
must use a parallel cable that supports 
IEEE-1284 bi-directional communications.

• The scanner driver is not installed or an 

operating environment is not set up 
properly.

• Ensure that port is properly connected 

and power is on, Then restart your 
computer.

• Check, The USB cable may be improperly 

connected or the power may be off.

• Do not use the parallel and the USB 

cables at the same time.

The printer driver icon 
does not appear in 
Chooser.

Software is not installed correctly. Reinstall the software; see 
page A.2.

The printer name does 
not appear in the 
Connect to box in 
Chooser.

• Make sure that the cables are connected correctly and the 

printer is turned on. 

• Check if “Ready” appears on the display of the control panel. 

If not, clear the problem depending on the error message; 
see page 8.11.

• Make sure that the correct printer driver has been selected in 

Chooser.

You cannot use the 
computer while the 
printer is printing.

Background Printing has not been selected.
• Select Background in the Background Printing tab of the 

Samsung SPL II Printer window.