Samsung SCX-4216F Manual De Usuario
G
ENERAL
F
AX
F
UNCTIONS
2.7
2
Automatic Redialling
If the number you have dialed is busy or there is no answer
when you send a fax, the machine will automatically redial the
number every three minutes up to seven times by the factory
default settings.
when you send a fax, the machine will automatically redial the
number every three minutes up to seven times by the factory
default settings.
When the display shows “Retry Redial ?,” press Enter to redial
the number without waiting. To cancel the automatic redialling,
press Stop/Clear.
the number without waiting. To cancel the automatic redialling,
press Stop/Clear.
To change the time interval between redials and the number of
redial attempts. See page 1.12.
redial attempts. See page 1.12.
Receiving a Fax
About Receiving Modes
• In the fax mode, the machine answers an incoming fax call
and immediately goes into the fax reception mode.
• In Tel mode, you can receive a fax by picking up the handset
of the extension phone and then pressing the remote receive
code (see page 2.9), or press On Hook Dial (you can hear
voice or fax tone from the remote machine) and then
pressing Start Copy/Fax on the control panel of your
machine.
code (see page 2.9), or press On Hook Dial (you can hear
voice or fax tone from the remote machine) and then
pressing Start Copy/Fax on the control panel of your
machine.
• In Ans/Fax mode, the answering machine answers an
incoming call, and the caller can leave a message on the
answering machine. If the fax machine senses a fax tone on
the line, the call automatically switches to Fax mode.
answering machine. If the fax machine senses a fax tone on
the line, the call automatically switches to Fax mode.
• In DRPD mode, you can receive a call using the Distinctive Ring
Pattern Detection (DRPD) feature. “Distinctive Ring” is a
telephone company service which enables a user to use a single
telephone line to answer several different telephone numbers.
For further details, see page 2.10.
telephone company service which enables a user to use a single
telephone line to answer several different telephone numbers.
For further details, see page 2.10.
When the memory is full, the receiving mode automatically
switches to Tel.
switches to Tel.