Samsung SCX-4521FR Manual De Usuario

Getting Started

2.11

You can control the following sounds:
• Speaker: You can turn on or off the sounds from the 

telephone line through the speaker, such as the dial tone or 
a fax tone. With this option set to “Comm.” the speaker is 
on until the remote machine answers. 

• Ringer: You can adjust the ringer volume.
• Key Sound: With this option set to “On” a key tone 

sounds each time a key is pressed.

• Alarm Sound: You can turn the alarm sound on or off. 

With this option set to “On” an alarm tone sounds when 
an error occurs or fax communication ends.

• You can adjust the volume level using the On Hook Dial 

button.

Press Menu until “Sound/Volume” appears on the top line 
of the display.

Press the scroll button (  or  ) to scroll through the 
options. Press Enter when you see the desired sound 
option.

Press the scroll button (  or  ) to display the desired 
status or volume for the option you have selected.

You will see the selection on the bottom line of the display. 
For the ringer volume, you can select “Off”, “Low”, “Med”, 
and “High”. Setting “Off” means that the ringer does not 
sound. The machine works normally even if the ringer is 
turned off.

Press Enter to save the selection. The next sound option 
appears.

If necessary, repeat steps 2 through 4.

To return to Standby mode, press Stop/Clear.

Press On Hook Dial. A dial tone sounds from the speaker.

Press the scroll button (  or  ) until you hear the volume 
you want. The display shows the current volume level.

Press On Hook Dial to save the change and return to 
Standby mode.

: You can adjust the speaker volume only when the 

telephone line is connected.

Toner Save mode allows your machine to use less toner on each 
page. Activating this mode extends the life of the toner 
cartridge beyond what one would experience in the normal 
mode, but it reduces print quality.
To turn the toner save mode on or off, press Toner Save. 
• If the button backlight is on, the mode is active and the 

machine uses less toner when printing a document.

• If the button backlight is off, the mode is deactivated and 

the machine prints with the normal quantity of toner.

: When PC-printing, you can also turn on or off the toner 

save mode in the printer properties. For details, see Software 

User’s Guide.

Power Save mode allows your machine to reduce power 
consumption when it is not in actual use. You can turn this 
mode on and select a length of time for which the machine 
waits after a job is printed before it switches to a reduced power 
state.

Press Menu until “Machine Setup” appears on top line of 
the display.

Press the scroll button (  or  ) until “Power Save” appears 
on the bottom line. Press Enter.

Press the scroll button (  or  ) to display “On” on the 
bottom line and press Enter.

Selecting “Off” means that the power save mode is 
deactivated.

Press the scroll button (  or  ) until the time setting you 
want appears.

The available options are 5, 10, 15, 30, and 45 (minutes). 

Press Enter to save the selection.

To return to Standby mode, press Stop/Clear.