Samsung SCX-4828FN Manual De Usuario

Loading originals and print media

The printed pages stack on the output tray, and the output support will help 

the printed pages align. To let the output support correctly align the pages 

you need to pull it out appropriately depending on the paper size.

If you use a machine in a humid area, or you are using the damp print media 

caused by a high humidity, the print-outs on the output tray may be curled 

and may not be stacked properly. In this case, you can set the machine to 

use the Paper Stacking function to let print-outs stacked firmly. But, using 

this function will make the print speed slow.
1.

Press Menu until System Setup appears on the bottom line of the 

display and press OK.

Press the left/right arrow until Maintenance appears and press OK.

Press the left/right arrow until Paper Stacking appears and press OK.

Press the left/right arrow to select On or Off and press OK.

Press Stop/Clear to return to ready mode.

After loading paper in the paper tray, you need to set the paper size and 

type using the control panel buttons. These settings will apply to Copy and 

Fax modes. For PC-printing, you need to select the paper size and type in 

the application program you use on your PC.
1.

Press Menu until System Setup appears on the bottom line of the 

display and press OK.

Press the left/right arrow until Paper Setup appears and press OK.

Press OK when Paper Size appears.

Press the left/right arrow until the paper tray you want appears and 

press OK. 

Press the left/right arrow until the paper size you are using appears and 

press OK. 

Press the left/right arrow until Paper Type appears and press OK.

Press the left/right arrow until the paper tray you want appears and 

press OK. 

Press the left/right arrow until the paper type you are using appears and 

press OK. 

Press Stop/Clear to return to ready mode.

•

If the output support is incorrectly adjusted, printed pages may be 

mis-aligned or fall.

•

If you continuously print many pages, the surface of the output tray 

may become hot. Be careful not to touch the surface, and 

especially keep children away from the surface.