Samsung SCX-4828FN Manual De Usuario

Faxing

faxing

This chapter gives you information about using your machine as a fax machine. 

•

•

•

•

In some countries, you are required by law to indicate your fax number on 
any fax you send. The Machine ID, containing your telephone number and 

name or company name, will be printed at the top of each page sent from 

your machine.
1.

Press Menu until System Setup appears on the bottom line of the 

display and press OK.

Press OK when Machine Setup appears.

Press OK when Machine ID appears.

Enter your name or the company name using the number keypad. You 

can enter alphanumeric characters using the number keypad, and 

include special symbols by pressing the 0 button. For details on how to 

enter alphanumeric characters, see page 27.

Press OK to save the ID.

Press the left/right arrow until Machine Fax No. appears and press OK.

Enter your fax number using the number keypad and press OK.

Press Stop/Clear to return to ready mode.

Before starting a fax, change the following settings according to your 

original’s status to get the best quality.

The default document settings produce good results when using typical 

text-based originals. However, if you send originals that are of poor 

quality, or contain photographs, you can adjust the resolution to produce 

a higher quality Fax.

Press

. 

Press Menu until Fax Feature appears on the bottom line of the 

display and press OK.

Press the left/right arrow until Resolution appears and press OK.

Press the left/right arrow until the option you want appears and press 
OK

.

Press Stop/Clear to return to ready mode.

Recommended resolution settings for different original document types 

are described in the table below:

You can select the default contrast mode to fax your originals lighter or 

darker.

Press

.

Press Menu until Fax Feature appears on the bottom line of the 

display and press OK.

Press the left/right arrow until Darkness appears and press OK.

Press the left/right arrow until the option you want appears and press 
OK

.

Works well with dark print.

Works well with standard typed or printed originals.

Works well with light print. 

We recommend you to use traditional analog phone services (PSTN: public 

switched telephone network) when connecting telephone lines to use Fax. If 

you use other Internet services (DSL, ISDN, VolP), you can improve the 

connection quality by using the Micro-filter. The Micro-filter eliminates 

unnecessary noise signals and improves connection quality or Internet 

quality. Since the DSL Micro-filter is not provided with the machine, contact 

your Internet Service provider for use on DSL Micro-filter.  

You cannot use this machine as a fax via the internet phone. For more 

information ask the internet service provider.

Originals with normal sized characters.

Originals containing small characters or thin 

lines or originals printed using a dot-matrix 

printer.

Originals containing extremely fine detail. Super 

Fine mode is enabled only if the machine with 

which you are communicating also supports the 

Super Fine resolution.

•

For memory transmission, Super Fine 

mode is not available. The resolution 

setting is automatically changed to 
Fine

.

•

When your machine is set to Super 
Fine

 resolution and the fax machine 

with which you are communicating does 

not support Super Fine resolution, the 

machine transmits using the highest 

resolution mode supported by the other 

fax machine.

Originals containing shades of gray or 

photographs.

The resolution setting is applied to the current fax job. To change the 

default setting, see page 52.