Samsung SCX-4623 Manual De Usuario

Network setup_ 35

4.

network setup

This chapter gives you step-by-step instructions for setting up the network connected machine and software.

•

•

•

•

•

  

Supported optional devices and features may differ according to your 
model. Please check your model name. 
(See "Features by Models" on page 23).

•

Ethernet 10/100 Base-TX

•

Windows 2000/XP/2003/2008/Vista

•

Various Linux OS

•

Mac OS X 10.3 ~ 10.6

•

TCP/IPv4

•

DHCP, BOOTP

•

DNS, WINS, Bonjour, SLP, UPnP

•

Standard TCP/IP Printing(RAW), LPR, 

IPP

•

SNMPv 1/2/3, HTTP(S), IPSec

•

TCP/IPv6 (DHCP, DNS, RAW, LPR, 
SNMPv 1/2/3, HTTP(S), IPSec)
(See "IPv6 Configuration" on page 39).

You need to set up the network protocols on the machine to use it as your 
network machine. You can set up the basic network settings through the 

machine's control panel.
The following table shows the network environments supported by the 
machine:

There are several programs available to setup the network settings easily in 

network environment. For the network administrator especially, managing 
several machines on the network is possible. 

Before using the programs below, set the IP address first.

Web server embedded on your network machine, which allows you to:

•

Configure the network parameters necessary for the machine to connect 

to various network environments.

•

Customize machine settings.
(See "Using SyncThru™ Web Service" on page 82).

This tool helps you to screen-capture, preview, scrap and print the screen of 

Windows Internet Explorer more easily, than when you use the ordinary 
program. Click Start > All programs > Samsung Printers > Samsung 

AnyWeb Print > Download the latest version to link the website where 

the tool is available for the download. This tool is available only for Windows 
operating systems.

This utility program allows you to select a network interface and manually 

configure the IP addresses for use with the TCP/IP protocol (See "IP setting 
using SetIP Program (Windows)" on page 36 or "IP setting using SetIP 

TCP/IPv6 is not supported by this program.

You must set up the network protocols on your machine to use it on your 

network. This chapter will show you how this is easily accomplished.
You can use network after connecting network cable to a corresponding 
port on your machine. 

You can print a Network Configuration Report from the machine’s control 

panel that will show the current machine’s network settings. This will help 

you to set up a network and troubleshoot problems.
1. Press Menu on the control panel.
2. Press the left/right arrow until Network appears and press OK.
3. Press the left/right arrow until Network Info. appears and press OK.
4. Press the left/right arrow until Yes appears and press OK.
Using this Network Configuration Report, you can find your machine MAC 

address and IP address.
For example: