Samsung SF-560 Manual De Usuario
M
AINTENANCE
5.5
5
3
Disassemble the white roller as follows:
The right end of the white roller has a plastic bushing that is snapped
shut with small tab on it. Pull the bushing slightly inward, then rotate
the bushing until it reach a slot (1). Then pull the roller upward (2).
shut with small tab on it. Pull the bushing slightly inward, then rotate
the bushing until it reach a slot (1). Then pull the roller upward (2).
4
Wipe the roller surface with a soft cloth dampened with water.
5
Carefully wipe the scanning glass with a soft dry cloth.
If the glass is very dirty, first wipe it with a slightly dampened cloth,
and then with a dry cloth. Be very careful not to scratch the glass
surface.
and then with a dry cloth. Be very careful not to scratch the glass
surface.
6
Replace the roller by inserting the left end first followed by the right
end, then rotating the bushing until it locks into place.
end, then rotating the bushing until it locks into place.
7
Reconnect the support and the control panel, then close the control
panel firmly until it clicks into place.
panel firmly until it clicks into place.